Parts

- Integrated lower headset for 1.5" or tapered steerers - 36° x 45°

- Steel construction - Adapts BMX chainrings with 22mm hole to 19mm spindles - Bag of 10

• 5/6/7-speed rear derailleur • Highly affordable and reliable • SHIMANO Equivalent RD-TY21 / RD-A070 • 301 grams

- DualHex kits: 5mm-broach bolts with 6mm-broach nuts for secure 2-wrench assembly - Triple kit can be used on 5-arm or 4-arm mountain/road cranks (includes 5 inner chainring bolts in addition to middle/outer bolt/nut set)

- ShiftMounts are adapter mounts which allows you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura. - Handlebar space is prime real-estate and this ShiftMount integrates seamlessly for a clean look. - 6061 T6 aluminum - Weight: 8g - Made in the USA

- Aheadset preload adjusting bolt

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

- 3-spline steel cogs for use with Sturmey 8-speed internal gear rear hubs - Flat or dished for tuning chainline. Chrome plated

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack

Stainless steel pedal washers - Sold in pairs

- Crank dust cap - Works with most three-piece crank models

Replacement bearing for the lower half of YST8003 #7 headset.

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- Chrome - Sold individually

- Routes cables underneath the bottom bracket - Will not rust or corrode

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

- Hoods with (FD) are Flight-Deck compatible

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability