- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.
Want to load up a big tire bike on your Kuat NV? You'll need the Strap Extender. It adds some length to the rear tire ratchet strap to keep big tires held down tight.
For transporting or storing your bike, Hollywood's Fork Block is the accessory you need. With a stout 9mm-diameter skewer that firmly grips your fork and a heavy-duty base that bolts to any solid surface, you can have a rack anywhere you need one.
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
A fork hitch for bike transportation that allows for versatile mounting options on any flat surface. - Pre-aligned positioning for easier fork installation - Remove Boost 15 x 110mm insert to accommodate 20mm axles - Easy mounting to any flat surface - Rust-free Aluminum construction - The platform is 3.75 x 1.5" and the holes are 3" center to center Compatible with following: - 15 x 110 mm (Boost, silver insert) - 15 x 135 mm (Borealis, Fatback, 9zero7 + other Fat Bike forks) - 15 x 142 mm (Salsa + others) - 15 x 150 mm (Rock Shox Bluto Fork + others) - 20 x 110 mm
- Rigid 6061-aluminum body with 9mm skewer
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
$45.98 - $59.98
- Adapters for mounting suspension forks to most auto bike racks - Solution to thru-axle issues or clearance problems between disc brakes & trays
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.
There's no need to worry when your bikes are unattended with Yakima's Lockup lock. The Lockup does double duty, locking your bike to the carrier and your hitch-mounted carrier to the car.
12 x 100mm fork adapter for use with 9mm fork-mount bike racks. - 12mm x 100mm - Axle not included. Works with your bike's thru-axle - Built-in safety tabs - Durable black powder-coat finish - All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.41 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty
Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key
$99.95 - $109.95
Thule's Load Bars are a rock solid rack solution that come in 4 different widths to fit a huge range of vehicles.
Take your bikes wherever you roam with Hollywood's Express 2! This trunk rack carries two bikes and fits almost any vehicle, including sedans, mini-vans and SUVs. Four straps solidly attach the Express to the rear of the vehicle, and Hollywood's fast and simple hub adjustment system offers easy installation while allowing this rack to fold flat for easy storage, too. Plus, Hollywood's separators make bike mounting easy and secure and are made of rubber to protect your two-wheeler's paint job. - Spacing between bike cradles: 7-inches - Distance between bike support arms: 15-inches - Four attachment straps - Weight: 10 lbs - Weight Capacity: 90 lbs
$124.95 - $125.00
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
- Securely carries both road and mountain bikes QR and thru-axles - Includes interchangeable inserts for QR axles (9mm) and thru axles (12mm, 15x100, 15x110) - Fat Bike compatible with optional accessory (Sold separately) - No frame contact means no damage to carbon fiber and custom paint jobs - Optional SKS locking package secures mount to vehicle, bike to mount (sold separately) - 1 bike, 40lbs capacity
Yakima's Viper bike mount has a rugged die-cast head that easily accepts and securely grips almost every quick-release fork, even those with disc brakes. For super easy mounting, it includes an ergonomic long-throw quick release and a ratcheting wheel strap. Plus, the Viper's long tray works great on vehicles with short roof lines. The Viper fits on round- and square-bar racks, too.
Don’t waste your weekend! Go explore with Saris’ Bike Porter Trunk 3-Bike rack. It’s outfitted with adjustable features to fit a vast variety of vehicles. Constructed of sturdy, durable steel, the rack’s frame has 15 different easy-to-adjust positions. It’s held in place by foam-padded legs and four straps, each with a smartly coated hook to protect your car’s finish. The bikes are held down with ratcheting, anti-sway straps and rest in protective, grooved rubber cradles, which allow the shift cables to slot down underneath and away from the top tube.
Hollywood's Commuter is a simple, economical hitch rack that's easy to use and keeps your bikes safe. This versatile and handy carrier fits both 1 1/4- and 2-inch receivers and carries up to 2 bikes. Soft rubber protects the finishes, integrated tie-down straps keep the bikes from swaying and Hollywood's No Wobble hitch pin keeps the rack in place. Plus, this smart rack conveniently tilts for easy cargo access, and its arms fold too. - Weight: 16 lbs - Max weight capacity: 35 lbs per bike - Hitch Size: fits both 1 ¼ and 2-inch - Not to be used on any trailer, fifth wheel, or towed vehicle
The proven Yakima tower for cars with nothing up top, the Q Towers pair with Q Clips to turn a naked roof vehicle into a versatile pile-it-on hauling machine. Durable, simple to install, and super-secure, these work with our RoundBars to get you where you want to go. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Works with the classic Yakima RoundBar - Four-way movement delivers a more solid fit - Padded base aids grip and helps preserve your paint job - Fast and easy tool-free installation and removal - Easily locks to you vehicle with our SKS system (sold separately) Product Specs: - Weight: 3.97 lbs./Pair - Dimensions: L 5.50 in x W 2.50 in x H 5.50 in - Limited Lifetime Warranty
Thule's Insta-Gater turns your truck bed into a stable, secure bike carrier. It mounts without tools because it's ingeniously held firmly in place by closing your truck's tailgate on the ends of the mounting straps. This unique bike rack accepts one bicycle with 20- to 29-inch wheels and up to 3-inch-wide tires. It's also easy and fast to mount your bike thanks to Thule's SecureHook that holds the bike by grabbing the front wheel. No frame contact is made. You can use more Insta-Gaters to carry more bikes.
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), and the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts, and accessories sold separately). Use the Thule Fit Guide to find the right Foot Pack for your vehicle. All mount without tools, are vinyl-coated so they can't damage your vehicle, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.
Thule's Sidearm is perfect for bikes with non-traditional frame designs or unique fork/hub interfaces because it holds bikes by the wheels only. For fast and easy loading, Thule's ratcheting SecureHook clamps the front wheel, while a ratcheting strap secures the rear. The Sidearm accepts most bicycles including those with 29-inch wheels. This fine bike mount fits on square and round crossbars (sold separately).
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), plus the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your vehicle, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.
Maximize your off-road exploring with Hollywood's Spare-Tire Rack! This smart rack carries 2 bikes, is fully adjustable to fit most rear spare tires, and boasts a rugged and simple strap design that holds fast and allows speedy installation and removal. Plus, the rack's support arms can be centered for off-center-mounted tires and folded down when not in use. The Spare Tire Rack comes fully assembled, too. - Distance between bike support arms: 13-inch - Distance between bike cradles: 7-inch - Maximum tire width 12-inch
The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.
Page 1 of 2 Next page