Protective/Armor

Protect your little rider with Strider's Knee And Elbow Pad Set. These tough pads boast premium hard plastic outer shells and Velcro straps to keep them securely in place.

- Protective padding for outer ankle bone - Sold in pairs

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5mm perforated Airprene, 1/4 inch foam inserts, injected molded plastic inserts and a 2mm Powertex crash panel.

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5mm perforated Airprene, .25 inch foam inserts, injected molded plastic inserts and a 2mm Powertex crash panel.

Some days even your go-to trail doesn't want to play nice. Second-skin fit offers the ultimate in comfort and mobility on XC and lighter Trail rides while strategic Kevlar fabric mapping ensures minimal, yet targeted coverage against nicks and abrasions. - Butterfly mesh sleeve with second skin fit and targeted coverage - Foam panel with stretch Kevlar cover for nicks and abrasions - Silicone gripper along inner top opening ensures 'stay-put' fit - Silicone patch at shin eliminates slippage - This pad is not rated for impact. It provides minimal coverage and is recommended to guard against nicks and abrasions only

The 3.0 EXT are extended hard-shell guards with 3DF impact foam that offers premium protection. The hard-shell design means there's no sock/sleeve; instead, a strap system allows for easy on/off and possible over-the-pant fit. It features a slimmer knee pad profile and an improved sliding surface, and offers a very nice fit with ergonomic left/right shapes. CE tested and certified protection that scores a total of 20 points in the Leatt protection rating system. - Hard-shell and 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Knee and shin EN1621-1 - Full shin extended length – EXT - New improved hard-shell sliding surface - 3D design for optimal fit with specific left and right sides - Slim shin plate that also fits inside boots - Weight: from 600g (1.32lbs) pair

- Stretch thermal brushed back fleece for comfortable weather protection - Foam panel with stretch Kevlar cover for nicks and abrasions - Silicone gripper along inner top opening ensures stay-put fit - Silicone patch at shin eliminates slippage - Extra length for cold-weather coverage - This pad is NOT rated for impact. It provides minimal coverage and is recommended to guard against nicks and abrasions only

- Youth-specific design and fit - Articulating two-piece, Elbow/Forearm hard shell - Perforated EVA Foam, enhances venting and moisture control - Strategic fabric mapping offers breathable mesh and durable Nylon abrasion zones - Soft Brushed elastic strapping - Locking D-ring closure system

Comfortable elbow pads that stay put throughout the ride. Hard shell performance, soft shell look and feel. - Hard shell performance, soft shell look and feel - Perforated neoprene enhances venting and moisture control - Terry lined for wicking and comfort - Soft mesh panel at inner elbow to keep cool - Integrated stabilization pad centers the elbow and ensures 'stay-put' fit - Woven upper elastic strap and lower Neoprene comfort strap - Branded rubber grab tab

Specifically designed with the growing Enduro scene in mind, the Indy Elbow combines the unrestricted mobility of the Race Face Charge Elbow pad with the added impact protection of D30. - Butterfly mesh sleeve with second skin fit and targeted coverage - D30 high performance shock absorbing foam covered by stretch Kevlar - Silicone gripper along inner top opening ensures 'stay-put' fit - Elastic top strap with Velcro closure for adjustment

Comfortable elbow pads that stay put throughout the ride. Hard shell performance, soft shell look and feel. - Women's specific fit - Perforated neoprene enhances venting and moisture control - Terry lined for wicking and comfort - Soft mesh panel at inner elbow to keep cool - Integrated stabilization pad centers the elbow and ensures 'stay-put' fit - Woven upper elastic strap and lower neoprene comfort strap - Branded rubber grab tab

The Launch Pro Elbow guards are trusted by some of the world's best riders. For 2019, they have been fully redesigned with CE certifications and flexible, impact-absorbing F3 Armor. They give you the confidence to attack even the most aggressive trails. They combine the comfort of soft slip-on style guards with the added security of hook-and-loop adjusters, so you get the perfect marriage of comfort and protection. - Impact-absorbing Fox F3 Armor conforms to the body for a full range of motion - Pre-curved ergonomic fit - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability - EN1621-1 level 1 CE certification

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5 mm perforated Airprene, ¼ inch foam inserts, injected molded plastic inserts and a 2 mm Powertex crash panel. Shin Guards are available in a one size fits all model.

The combination of a hard-shell lower arm and soft 3DF impact foam elbow give you both comfort and premium protection. It's a great product for all soft pad users who are looking for a sliding, more protected lower arm but still want a soft elbow pad feel. Now with an improved sliding surface, perforated and vented sleeve, and a silicone-coated X-strap and ergonomic left/right shapes for that solid fit. CE tested and certified protection, it scores a total of 13 points in the Leatt protection rating system. - CE tested and certified as impact protection: Elbow EN1621-1 - New 25% slimmer CE impact certified profile - Anti-odor MoistureCool and AirMesh wicking fabrics - Silicone-printed, non-slip cuffs - 3D design ensures a great fit that is very comfortable - Weight: 300g (pair)

- Youth-specific design and fit - Articulating two-piece, full-length hard shell - Perforated EVA Foam, enhances venting and moisture control - Strategic fabric mapping offers breathable mesh and durable Nylon abrasion zones - Soft Brushed elastic strapping - Locking D-ring closure system

- Double layer custom foam for increased airflow and reduced weight - Upper calf muscle support to prevent pad from slipping - Center adjustment strap provides even tension above calf muscle and around top of pad - Custom idp polygon neoprene for superior protection and ventilation - Designed beyond CE EN 1621/1 Standards

The Launch Pro Knee guards are trusted by some of the world's best riders. For 2019, they have been fully redesigned with CE certifications and flexible, impact-absorbing F3 Armor. They give you the confidence to attack even the most aggressive trails. They combine the comfort of soft slip-on style guards with the added security of hook-and-loop adjusters. So you get the perfect marriage of comfort and protection. - Impact-absorbing Fox F3 Armor conforms to the body for a full range of motion - Pre-curved ergonomic fit - Slip-on fit with hook and loop adjuster - Perforated neoprene offers comfort & breathability - EN1621-1 level 1 CE certification

The AirFlex elbow guard offers a minimalistic, comfortable fit, and provides impact protections—achieving all of Leatt's design criteria. By changing over to a 3D-shaped impact gel, they've achieved the minimalistic slim shape, whilst still keeping the CE impact protection certification. The lightweight construction and silicone grip panels give you the famous Leatt non-slip fit. Once you put these on, you will understand what they mean. CE tested and certified protection that scores a total of 11 points in the Leatt protection rating system. - Super slim, 3D molded AirGel impact protection - CE tested and certified as impact protection: Elbow EN1621-1 - Anti-odor MoistureCool and AirMesh wicking fabrics - Silicone lamination, non-slip cuffs to keep protector in place - Silicone-printed, cupped elbow grip - Our 3D design ensures a great fit that is very comfortable - Weight: from 240g (0.53lbs) pair

- Low profile, minimal protection at its best - Compression fit kneepad with high-strength, flexible 1mm cap for superior fit and movement - Poly/Spandex and 4 way stretch mesh that is rollable and stowable enough to fit in a jersey pocket - Designed beyond CE EN 1621/1 Standards

The Enduro Pro Elbow guard offers our highest level of protection in an ultra-light pedal-friendly design. The slip-on design with flexible impact-absorbing Fox F3 Armor provides you with minimal restrictions and maximum benefits. - Impact-absorbing foam provides full coverage & unrestricted range of motion - CE-certified coverage using Fox's proprietary F3 Armor - Moisture-wicking, open stretch mesh at back of guards for breathability - Cordura fabric offers higher abrasion resistance in key impact areas - Reinforced skid plate reduces friction with the ground in a sliding fall - Foam inserts are removable for easy washing - Certifications: EN1621-1 level 1 elbow including high & low conditions

Leatt's soft-shell 3DF impact foam elbow pads just keep getting better and better. Now with a refined sleeve construction with the latest material tech, these pads offer ventilation, great fit, and anti-slip features, while providing premium protection. It's CE tested and certified protection that scores a total of 11 points in the Leatt protection rating system. - 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Elbow EN1621-1 - New anti-slip forearm X-strap with silicone bicep lining - Abrasion-resistant Aramid outer layer for durability - Anti-odor MoistureCool and AirMesh wicking fabrics - Pre-curved design for better fit and function - Silicone printed elbow grip - Weight: from 350g (0.77lbs) pair

Specifically designed with the growing Enduro scene in mind, the Indy Leg combines the unrestricted mobility of the Race Face Charge Leg with the additional impact protection of the T5 Evo. Second-skin Butterfly Mesh sleeve with targeted D30 high performance shock absorbing protective foam knee. Protection you can trust on rowdy descents built into a minimal sleeve for unlimited range of motion while climbing. - Lycra and butterfly mesh sleeve offers second skin fit - Targeted D30 high performance shock absorbing impact foam knee coverage - Woven elastic top strap with Velcro closure for personalized adjustment - Silicone gripper along inner top opening ensures "stay-put" fit - Silicone patch at shin eliminates slippage

- Softshell look and feel, but with a high impact shell under 600 denier nylon - Open-back design; no shoe removal necessary - Perforated Neoprene enhances venting and moisture control - Terry lined for wicking and comfort - Foam padded side walls offer additional coverage

The Enduro Pro Knee guard offers our highest level of protection in an ultra-light pedal-friendly design. The slip-on design with flexible impact-absorbing Fox F3 Armor provides you with minimal restrictions and maximum benefits. - EN1621-1 level 1 knee including high & low conditions - Impact-absorbing foam provides full coverage & unrestricted range of motion - CE-certified coverage using Fox's proprietary F3 Armor - Moisture-wicking, open stretch mesh at back of knee for breathability - Cordura fabric offers higher abrasion resistance in key impact areas - Reinforced skid plate reduces friction with the ground in a sliding fall - Foam inserts are removable for easy washing - Certifications: EN1621-1 level 1 knee including high & low conditions

The Launch Pro Knee/Shin guards are trusted by some of the world's best riders. For 2019, they have been fully redesigned with CE certifications and flexible, impact-absorbing F3 Armor. They give you the confidence to attack even the most aggressive trails. They combine the comfort of soft slip-on style guards with the added security of hook-and-loop adjusters, so you get the perfect marriage of comfort and protection. - Impact-absorbing Fox F3 Armor conforms to the body for a full range of motion - Anatomically-shaped & asymmetrical shin guards provide pedal-friendly comfort - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability - Certifications: EN1621-1 level 1 CE certification

That voice in your head that’s telling you to back off and slow it down—yeah, you don’t need to listen to him. . iXS’s Mallet Knee/Shin Guards have you covered, literally. They are lightweight, loaded with high-tech features, and they fit securely to give you extra confidence. The AeroMesh material is lightweight and extremely breathable to help keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. • ArmadilloDuo: dual-density padding made from flexible, shock absorbing thermoplastic • SqueezeBox: an articulating joint at the knee for a great fit with max comfort while pedaling • NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees • KneeGusset: horseshoe-shaped gusset designed to keep pads in place during impact

Consider yourself one of the lucky ones if you’ve felt the thrill of annihilating the trail at ridiculously fast speeds. Proper protection at those speeds is essential, and iXS has you covered with the Carve Elbow Guards. These lightweight, low-profile pads have the protection and features you need for your adrenaline-fueled, gravity-slaying rides. The AeroMesh material is lightweight and extremely breathable to help keep your arms cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. Key Technologies - Xmatter: supple, vented, open-cell foam that hardens on impact to disperse shock - Aeromesh: lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking

Consider yourself one of the lucky ones if you’ve felt the thrill of annihilating the trail at ridiculously fast speeds. Proper protection at those speeds is essential, and iXS has you covered with the Carve Elbow Guards. These lightweight, low-profile pads have the protection and features you need for your adrenaline-fueled, gravity-slaying rides. The AeroMesh material is lightweight and extremely breathable to help keep your arms cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. Silicone strips inside deliver a no-slip fit and iXS’s LoopLock closures provide compression with maximum security. Key Technologies - Xmatter: supple, vented, open-cell foam that hardens on impact to disperse shock - Aeromesh: lightweight and anti-bacterial treated 3D performance mesh, optimized for breathability and moisture wicking

This hard-shell lower arm and soft, 3DF impact foam elbow combination provides both comfort and premium protection. It's a great product for all soft pad users who are looking for a sliding, more protected lower arm but who are still looking for that soft elbow pad feel. Now with an improved sliding surface, perforated and vented sleeves, as well as a silicone-coated X-strap for that solid fit with ergonomic left/right shapes. It's CE tested and certified protection that scores a total of 13 points in the Leatt protection rating system. - Soft elbow guard with hard-shell forearm sliders - CE tested and certified as impact protection: Elbow EN1621-1 - New anti-odor MoistureCool and AirMesh wicking fabrics - Abrasion-resistant Aramid outer layer for durability - Silicone printed elbow grip - 3D design ensures a great fit that is very comfortable - Weight: from 300g (0.66lbs) pair

The soft-shell 3DF impact foam knee pads from Leatt just keep getting better and better. They know ventilation, fit, and anti-slip is key for you, and great protection is a given. The 3DF AirFit impact foam material offers a soft and flexible fit, yet instantly transforms into a harder, energy-absorbing protector upon impact. These pads feature a refined sleeve construction and are packed with the latest material tech. CE tested for certified protection that scores a total of 13 points in the Leatt protection rating system. - Total Leatt protection score of 13 points - 3DF AirFit ventilated soft impact foam - CE tested and certified as impact protection: Knee EN1621-1 - Abrasion-resistant Aramid outer layer for durability - Pre-curved 3D design for better fit and function - All protection materials perforated for ventilation - Weight: from 500g (1.1lbs) pair