Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

$950.00 - $1,150.00
Zipp hits high all-around marks with their 303 Firecrest Carbon Clincher wheelset, thanks to a wide tire bed and mid-aero profile. The 28.5mm rim width provides confident control in nasty crosswinds and on rough roads, and the 45mm Firecrest rim profile offers wind-shedding aerodynamics while maintaining great acceleration characteristics. Zipp's 77/177 hubset, laced with Sapim CX-Sprint spokes, provides maintenance-free reliability and lateral stiffness, and trusted stopping power comes via Tangente Platinum Pro Evo brake pads. Included with each wheel are a Zipp-integrated Valve Extender with valve-core wrench, rim tape, and quick release.
$1,300.00
Zipp optimized its Firecrest technology to build a highly aerodynamic 82mm rim—the 808 Firecrest Carbon Clincher. Designed for efficient power transfer and stable control in time trial and triathlon competition, the 808's wide 27.5mm rim shape provides confident tracking in crosswinds and over rough surfaces. Built with Zipp's excellent 77/177 hubset that features optimized flange geometry and Sapim CX-Sprint spokes to increase lateral stiffness, this 1,1885-gram wheelset combines toughness and reliability in a wind-shedding package that has to be ridden to fully appreciate. Each wheel includes specially-designed Tangente Platinum Pro Evo brake pads, Zipp Integrated Valve Extender with valve-core wrench, rim tape, and quick release.
$12.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
$16.63
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
$2,375.00
Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting.
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 135mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 146mm - 1 axle per bag
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 174mm - 1 axle per bag
$40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 24tpi - Diameter: 9.5mm - Length: 180mm - 1 axle per bag
$1.80 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
$44.00
- Syntace x-12 Rear axle standard creates a stiffer and lightweight rear end - Syntace x-12 Parts are only compatible with frames that have Syntace x-12 Dropouts
• Replacement aluminum quick release skewers
- Replacement rear skewer - Spacing: 135mm - Material: Steel
$19.99
- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install
$23.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
$12.50
Replacement bearings for Stan's NoTubes Neo hubs. Includes 2 bearings. - 26mm OD x 15mm ID - 7mm thick
$20.00 - $21.00
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
$16.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
$48.49
Sta Tru Front Wheel - Hub/Brake Compatibility: Rim Brake - Wheel Size: 16-inch - ISO Diameter: 305 / 16-inch - Front Axle: 3/8-inch x 100mm - Tire Type: Clincher
$43.49
Sta Tru Front Wheel - Steel rim - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Rim Width (Internal): 24 mm - Tire Type: Clincher
$40.00
- Taiwan cruiser steel rims are 39mm wide, w/ 36 holes, 12G CP - Cruiser wheels use C/N 12G UCP heavy duty spokes w/ 5/8" brass nipples - Bolt on wheel
$55.99
Sta Tru Front Wheel - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27" - ISO Diameter: 630 / 27" - Tire Type: Clincher
$58.99 $66.99 12% Off
Sta Tru Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27" - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 630 / 27" - Tire Type: Clincher
$48.49 $58.99 18% Off
Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 650b - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 584 / 650b / 27.5" - Tire Type: Clincher - Rear Axle: QR x 135mm
$59.99 $69.99 14% Off
Sta-Tru Wheels TR21V tubeless-ready double-wall rims - Hybrid rim with an attractive rim profile developed for Sta-TruWheels, Inc - KT ATB 9mm/100/108 axle hub - Silver UCP spokes
$49.99
- Sta-Tru Wheels ST725 silver anodized alloy single wall rims w/ 36holes - Attractive 21mm tall aero profile, and includes a nice 10.5mmbraketrack with wear indicator - Road style KT alloy road hub adds value - 36 UCP spokes
$125.00 - $169.99
- Skyway's original Tuff wheel - Built to accommodate pneumatic or non-pneumatic tires
$36.00
- Standard skewers fit either 130 or 135mm spaced hubs, unless listed as another length (i.e. 170mm) - 6061 machined lever with stainless steel pivot and laser-etched logo - All shafts are 5mm in diameter
$148.00
SRAM's X9 hubs are built tough with light aluminum hubshells for the strength to tackle the mountain year after year. You'll love the durable high-precision cartridge bearings that spin smoothly in all conditions. Plus, careful machining helps keep the X9's weight low without compromising durability.
$42.00 - $48.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
$79.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
Page 1 of 3 Next page