Electronics

Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

Topeak's PanoBike Bluetooth Smart Heart Rate Monitor turns your smartphone, tablet, or any Bluetooth Smart Ready device into your personal trainer. With the free PanoBike app installed on your device, this water-resistant soft-sided chest strap will transmit over 1,800 hours of operation at a range up to 30 feet.

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Dura-Ace 7710 Track crank arm. Track Specific. Designed to meet the specific requirements of fixed gear track bikes, the Stages Power meter is the go-to choice for track racers at the World, Olympic and elite amateur levels. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

Sigma's feature-packed BC 5.12 computer is extremely simple to use and features a crystal clear, easy-to-read display. The single-button navigation allows simple scrolling through the five different functions.

Take open-ear listening to new depths. Swim, run, cycle, and train harder than ever before with open-ear headphones that can withstand all elements. - Open-Ear Design—Patented bone conduction technology delivers audio through the cheekbone, keeping you comfortable and aware of your surroundings in or out of the water. - Internal Music Storage—Load your favorite audio and dive into your workout with 4GB of built-in MP3 storage, holding up to 1,200 songs. Not compatible with Bluetooth or audio streaming services. - 8-Hour Battery Life—Enjoy 8 continuous hours of premium audio while you're cross-training. - IP68 Waterproof Rating—Fully waterproof, Xtrainerz headphones perform in and out of the water. Submersible in depths up to 2 meters for 2 hours. - Comfortable + Secure—An open-ear design enables bud-free listening and keeps the headphones in place for every stroke.

The crankset is the heart of your bicycle and where you’ll find the SRAM RED Quarq power meter. The sole job of the crankset is to convert the effort from both legs to forward motion. It is the perfect place to measure power. This power meter works for every discipline: Road, triathlon, time trial, and cyclo-cross. The chainrings are replaceable should your bike, discipline, or ability change. - A direct force power meter that measures total power output from both legs with +/-1.5% accuracy - Works for every discipline: Road, triathlon, time trial, and cyclo-cross - No compromises on materials, shifting, wheels, or pedal choice - Proven by pro teams and athletes throughout the world – Cobbled Classics, Giro d’Italia, Tour de France, Vuelta a España, World Championships - Number 1 at the Ironman World Championship for the last three years - Uses a hidden bolt to mount the chainrings – compatible SRAM chainrings ensure the derailment pin lines up behind the crank arm - 10K – programmed with over 10,000 data points to eliminate temperature effects on power measurement - AxCad – A multi-axis accelerometer switches the power meter on and measures cadence, simplifying installation and operation - Breakthrough Materials – Exogram hollow carbon fiber crank arms – the lightest, strongest crank arms SRAM makes – minimize weight and maximize speed [ELSA RS, ELSA R and SRAM RED] - Easy to use (and reuse) – LED indicator and visible ANT+ ID - The replaceable CR2032 battery never leaves you without power - Manual and automatic zeroing make it truly set and forget - Built to Last – IPX7 waterproof rating, 2-year warranty, free firmware updates, and acclaimed international support - Moves with you from bike to bike - With Quarq's free Qalvin app – available for Windows, Mac, iOS and Android – you can set the zero offset, check battery voltage, run diagnostics, and perform firmware updates for free Arm Material: Carbon arms, Machined alloy spider Weight: 778 grams (GXP 172.5mm 53x39 BB not included) * Chainrings and BB sold separately

Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls

The SRAM XX1 Eagle Power Meter unites Quarq's DZero power meter platform with carbon tuned crank arms for robust, intuitive power measurement in the lightest ever chassis. The DZero platform embodies 10 years of Quarq's technology advances and adds new features such as dual Bluetooth low energy and ANT+ wireless data transfer, and the Qalvin BLE app. The companion X-SYNC 2 chainrings are designed specifically for Eagle chains and drivetrains. - BB Included: No - Chainring BCD: 104 - Chainrings sold separately

Take your training and racing to new heights with SRAM's XX1 Quarq Power Meter Crankset. It takes SRAM's brilliantly stiff, hollow carbon XX1 cranks, and marries them to an integrated, ultra-precise Quarq Power Meter for feathery low weight and accurate power measurement. Feel every watt course through the crank and propel you forward, while every iota of your strength is recorded with an accuracy of +/- 1.5%. Having precise objective feedback lets you see your improvements. And, to make setup as easy as possible it features an easily accessible, weather-tight battery compartment.

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

Consistency in training leads to better results, which is why using a consistently accurate and reliable power meter is vital. Quarq's Active Temperature Compensation, which is calibrated with over 10,000 data points, makes their ELSA R accurate to within 1.5%. Quarq's Exogram Hollow Carbon crankarms deliver every watt to the road while keeping the weight incredibly low. ANT+ technology lets you hook up your desired compatible head unit (sold separately), the LED indicator flashes when the power meter is on, and the single, easily replaced CR2032 battery lasts for up to 300 hours of ride time. - Compatible with 10/11-speed SRAM, Shimano (10-speed only) Rotor, FSA, Praxis, WickWerks, and other chainrings - Chainrings and bottom bracket are sold separately - 110 BCD

Consistency and accuracy in training lead to better results, which is why using a consistently accurate and reliable power meter is vital. Quarq power meters using Quarq technology, measure power at the crankset spider. This the best place on the bike to measure power because all of your pedaling effort flows directly through the spider and it can be measured with great precision. Quarq's Active Temperature Compensation, which is calibrated with over 10,000 data points, makes their ELSA RS Power Meter Crankset accurate to within 1.5% (strain gauges benefit from accurate temperature). Plus the ELSA RS is specifically designed to match Shimano's 4-bolt Hollowglide chainrings for a seamless junction between ring and chassis. Quarq's Exogram Hollow Carbon crankarms deliver every watt to the road while keeping the weight incredibly low. ANT+ technology lets you hook up your desired compatible head unit, the LED indicator flashes when the power meter is on, and the single, easily-replaced CR2032 battery lasts for up to 300 hours of ride time. - Compatible with 11-speed Shimano chainrings (Dura-Ace, Ultegra, and 105) - Chainrings and bottom bracket are sold separately - Requires ANT+ head unit (sold separately) - 616 grams (GXP, 172.5mm) - Battery life: 300 hours

Consistency in training leads to better results, which is why using a consistently accurate and reliable power meter is vital. Quarq's Active Temperature Compensation, which is calibrated with over 10,000 data points, makes their ELSA R accurate to within 1.5%. Carbon crankarms deliver the power to the road and keep the Riken light on the climbs. ANT+ technology lets you hook up your desired compatible head unit (sold separately), the LED indicator flashes when the power meter is on, and the single, easily replaced CR2032 battery lasts for up to 300 hours of ride time. - Compatible with 10/11-speed SRAM, Shimano (10-speed only) Rotor, FSA, Praxis, WickWerks, and other chainrings - Chainrings and bottom bracket are sold separately - 110 BCD

PowerTap's Bluetooth Smart Dual Speed/Cadence Sensor gives you the ability to monitor your speed and cadence with your favorite Bluetooth-compatible device. It's sleek and easy to mount on your frame.

These aren't ordinary pedals. The P1 pedal is a simple, intelligent and uncompromising design that provides the same proven PowerTap accuracy and reliability. The simple one-piece design easily mounts to any crank and does not require calibration nor installation angle setting, providing a true “plug-and-play” experience. The P1 also features dual band ANT+ and Bluetooth SMART for compatibility with a multitude of head units and smart devices. Plus, the independent measurement opens the possibility for a new set of pedaling metrics previously unavailable to help give you the ultimate competitive edge.

- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"

The Garmin XL Combo mount by K-Edge is the next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer and GoPro compatible cameras & lights, specifically designed to accommodate the EDGE 1030, 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. The K-Edge advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that our replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-EDGE provides free replacement inserts, as needed. Compatibility - All Lumina Series lights equipped with K-Edge GoPro Adapter (sold separately). - Supported Computers: Garmin Edge 1030, 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Camera Interface: GoPro style interface for compatible action cameras or lights - Includes Garmin Pro XL Combo Mount and mounting hardware - CNC Machined 6061 T6 Aluminum - Fits 31.8mm handlebars - New clamp design is hinged for ease of installation - Weight: 64g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects (damages due to abuse or crashing excluded) - Note: Assembly bolts not meant to be removed or tampered with at any time.

MSW Miniac Wireless computers are designed to be installed quickly and give the essential information riders need to best enjoy their trip. - Ten functions: clock, current speed, average speed, current vs average speed comparison, maximum speed, trip time, trip distance, total odometer, auto scan, calories - Two-button design - CR2032 battery included

The Macro Plus GPS is the perfect device for casual to serious cyclists that just need the main essentials of a cycling GPS computer. Features horizontal and vertical orientation, an improved water-resistant plug and enhanced styling. - Optimized GPS satellite recording - When paired with the GPS Ally phone app, the device offers full turn-by-turn navigation, phone notifications, Lezyne Track (live tracking), Strava Live Segments, training integration and device customization - The hardware and firmware have also been improved with a higher resolution screen and the ability to connect with the “Smart Connect” LED system - Charging USB port has been upgraded for improved water-resistance - Pairs with Bluetooth Smart enabled heart rate monitors, cadence/speed sensors and power meters - Rechargeable battery offers up to 28-hours of runtime - Durable, composite construction - 2020 Software update offers compatibility with Komoot and Relive in addition to Strava, TrainingPeaks, and Today's Plan

Utilizing the ultimate in cycling GPS technology, this is a must have device for serious riders. It has a large, 2.7-inch 240x400 high-resolution screen with the option of vertical or horizontal viewing. - Pairs with Bluetooth Smart or ANT+ enabled power meters, heart rate monitors and speed/cadence sensors, in addition to compatible electronic drivetrains - When paired with an iOS or Android handheld through the free Lezyne Ally V2 app, the device provides turn-by-turn navigation and phone notifications (incoming calls, texts and message app notifications) - Live tracking (Lezyne Track) can be activated in the app to let friends and family follow rides in real-time - Super accurate, advanced data recording system combines GPS plus Glonass satellites and has a barometer and accelerometer for added accuracy - Battery runtime of up to 48 hours - Durable, composite construction - Intuitive four button operation - Micro USB rechargeable

- Strong rubber straps securely hold phone - CNC machined aluminum mount - Replaceable rubber strap - Come with 2 sizes of straps to fit most smartphones

The Smart Vise Mount is an extra-secure, highly versatile smart phone mount that straps to nearly all styles of bicycle handlebars. Its main frame is constructed from durable machine aluminum and its industrial design works great and looks great. The mount is lined with a soft, no-slip material and it’s compatible with nearly all styles of modern smart phones. It features a unique dual-rod design that slides open or closed via a twist knob for secure and precise phone mounting. Excellent for hardcore commuters and all other cyclists, the Smart Vise Mount is a terrific device for on-bike smart phone accessibility. - Secure vise grip to hold phones tight - Soft padded to protect phone and reduce vibration - Replaceable rubber strap - Fits most phones with or without a case -125g

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

Professional, aero-shaped 31.8mm handlebar mount designed for Garmin Edge 200, 500, 510 models. - Created with design feedback from pro Team Sky - Mounts computer close to stem - Slim clamp area reduces handlebar footprint - Precision machined, anodized 6061 T6 aluminum - Weight: 29g

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter. - Max combo mount is compatible with GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820) - Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface - GARMIN approved replaceable computer insert protects computer tabs - CNC Machined Aluminum, Anodized Black with laser etched logos - Made in-house, Boise, Idaho USA with a Lifetime Warranty - Weight: 60g

Sleek, solid, spoon-shaped combo handlebar mount for integrated handlebar/stem systems; providing ideal aero, pro-positioning for Garmin Edge models up to 1000 series, and camera. - Go Pro Action camera type attachment for camera - Adjustable fore and aft to align with integrated bar mounting holes - Mounts underneath integrated bars out front in center - Secure connection to bike with four locking engagement points - Fits integrated handlebars including: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream - Precision machined, anodized 6061 T6 Aluminum - Lifetime warranty - Made in USA - Weight: 52g